PNW-2000 Computer Controlled Light Alloy Wheel Torsion Fatigue Testing Machine
 | PNW-2000 is mainly composed of three parts: the load frame, the electric control cabinet and the microcomputer measurement and control system. The servo electric cylinder reciprocates up and down by connecting the load cell, and then drives the booster arm to reciprocate up and down to turn the torsion of the force arm, thereby applying a torque to the wheel. |
Introduction
PNW-2000 is mainly composed of three parts: the load frame, the electric control cabinet and the microcomputer measurement and control system. The servo electric cylinder reciprocates up and down by connecting the load cell, and then drives the booster arm to reciprocate up and down to turn the torsion of the force arm, thereby applying a torque to the wheel.
Standards
It meets the standards of GB/T 22435-2008 , QC/T211-1996, QC/T212-1996, JASO T 203-85, ISO8644-1988, ISO8645-1988, GB/T6147-92.
Applications
It is mainly used to complete torsion fatigue test and inspection to light alloy wheel of Motorcycle or Light Motorcycle.
Technical Specification
Max.torque | 2000 Nm |
Max.load | 5000N |
Wheel rim width | 1.25’’ – 8’’ |
Resolution | ±1% of 20%FS |
The arm of force | 600mm |
Frequency | 1-5HZ |
Accuracy | ≤±5% |
Diameter of tested wheel | 10-19 inch |
Displayed test times | 106 |